Shopping Basket

Surf's Up Card

 

A great card making project

for any sporty, surfing male

 

 

What will you need?

  • DCD649 Surfing die-cut decoupage sheet
  • 900315 Pebbles On The Shore backing card
  • Pearlescent card turquoise and teal
  • XL649 Silver rope border peel off stickers
  • Double-sided foam pads, glue, double-sided tape, ruler, craft knife & scissors

 

  • Take the pebble backing card and trim it down to 28.5cm x 20.5cm (to fit a standard envelope when folded)
  • Carefully score a line across the card at 15cm and fold in half

​This will be your card blank. The front will be slightly smaller than the back.

  • ​Cut a 11cm X 16cm piece of turquoise pearlescent card
  • ​And a 11.5cm x 16.5cm piece of teal pearlescent card
  • ​Stick the turquoise card on top of the teal card

  • Pop out the main base picture from the decoupage sheet
  • ​Stick it to the pearlescent card

 

  • Now stick it to the front of the pebble card blank   approx. 1cm from the top and left-hand side

  • Cut a 5mm strip from each of the pearlescent cards
  • ​Stick them across the bottom of the card blank below the picture

​If you cut the strips slightly longer than you need you can trim of any excess once they are stuck to the card blank.

  • Add a silver rope border peel off (XL649) along the centre of the two strips of pearlescent card

  • Cut a 1.5cm strip of teal pearlescent card and stick it on the inside of the card blank down the right-hand side. (This will show from the front of the card)

​Once again, you can cut it slightly longer than you need and trim off any excess.

 

  • ​Pop out a sentiment tag from the decoupage sheet
  • ​Stick it onto pearlescent card

 

  • ​Add foam pads to the back
  • Attach it to the card blank at a slight angle overlapping the bottom corner of the picture
  • Open up the card blank
  • ​Stick a strip of pebble card next to the pearlescent card you attached earlier. You can use the piece of pebble card that you trimmed from the whole sheet earlier
  • ​Next, add a silver rope border peel off (XL649) down the centre of the two strips and another one down the left-hand side
  • Pop out the rest of the decoupage elements from the sheet
  • Layer up your 3d decoupage design using foam pads
  • There are extra words on the sheet so add another sentiment if desired

You will also find this picture on the decoupage sheet

 

  • Add a Happy Birthday to this
  • And stick it on the inside of your card

Your card is now complete.

​Who will be the lucky recipient?

 

Page 1 of 1:    5 Items

Die-cut, step by step design for 3d decoupage. 1 design per A4 sheet plus message tags. Approx. design size 105mm x 152mm.

In stock for immediate dispatch!  In stock for immediate dispatch!
£0.99

A4 card backing sheet. Acid and Lignin free.

In stock for immediate dispatch!  In stock for immediate dispatch!
£0.55

23 borders per sheet. Sheet size 98 x 225mm

In stock for immediate dispatch!  In stock for immediate dispatch!
£0.45
RRP: £0.79

Acid and Lignin free. Available as individual A4 sheets. 240gsm

In stock for immediate dispatch!  In stock for immediate dispatch!
£0.40
RRP: £0.45

Acid and Lignin free. Available as individual A4 sheets. 240gsm

In stock for immediate dispatch!  In stock for immediate dispatch!
£0.40
RRP: £0.45

Page 1 of 1:    5 Items